UPDATE operation in AQL

The UPDATE operation partially modifies a document with the given attributes, by adding new and updating existing attributes

Each UPDATE operation is restricted to a single collection, and the collection name must not be dynamic. Only a single UPDATE statement per collection is allowed per AQL query, and it cannot be followed by read or write operations that access the same collection, by traversal operations, or AQL functions that can read documents.

You cannot update the _id, _key, and _rev system attributes, but you can update the _from and _to attributes.

Updating a document modifies the document’s revision number (_rev attribute) with a server-generated value.

Syntax

The two syntaxes for an update operation are:

UPDATE document IN collection
UPDATE keyExpression WITH document IN collection

Both variants can optionally end with an OPTIONS { … } clause.

collection must contain the name of the collection in which the document should be updated.

document must be an object and contain the attributes and values to update. Attributes that don’t yet exist in the stored document are added to it. Existing attributes are set to the provided attribute values (excluding the immutable _id and _key attributes and the system-managed _rev attribute). The operation leaves other existing attributes not specified in document untouched. This distinguishes the UPDATE from the REPLACE operation, which affects all attributes of the stored document and not only the attributes you specify in the operation.

Sub-attributes are recursively merged by default, but you can let top-level attributes replace existing ones by disabling the mergeObjects option.

UPDATE <document> IN <collection>

Using the first syntax, the document object must have a _key attribute with the document key. The existing document with this key is updated with the attributes provided by the document object (except for the _id, _key, and _rev system attributes).

The following query adds or updates the name attribute of the document identified by the key my_key in the users collection. The key is passed via the _key attribute alongside other attributes:

UPDATE { _key: "my_key", name: "Jon" } IN users

The following query is invalid because the object does not contain a _key attribute and thus it is not possible to determine the document to be updated:

UPDATE { name: "Jon" } IN users

You can combine the UPDATE operation with a FOR loop to determine the necessary key attributes, like shown below:

FOR u IN users
  UPDATE { _key: u._key, name: CONCAT(u.firstName, " ", u.lastName) } IN users

Note that the UPDATE and FOR operations are independent of each other and u does not automatically define a document for the UPDATE statement. Thus, the following query is invalid:

FOR u IN users
  UPDATE { name: CONCAT(u.firstName, " ", u.lastName) } IN users

UPDATE <keyExpression> WITH <document> IN <collection>

Using the second syntax, the document to update is defined by the keyExpression. It can either be a string with the document key, an object which contains a _key attribute with the document key, or an expression that evaluates to either of these two. The existing document with this key is updated with the attributes provided by the document object (except for the _id, _key, and _rev system attributes).

The following query adds or updates the name attribute of the document identified by the key my_key in the users collection. The key is passed as a string in the keyExpression. The attributes to add or update are passed separately as the document object:

UPDATE "my_key" WITH { name: "Jon" } IN users

The document object may contain a _key attribute, but it is ignored.

You cannot define the document to update using an _id attribute, nor pass a document identifier as a string (like "users/john"). However, you can use PARSE_IDENTIFIER(<id>).key as keyExpression to get the document key as a string:

LET key = PARSE_IDENTIFIER("users/john").key
UPDATE key WITH { ... } IN users

Comparison of the syntaxes

Both syntaxes of the UPDATE operation allow you to define the document to modify and the attributes to add or update. The document to update is effectively identified by a document key in combination with the specified collection.

The UPDATE operation supports different ways of specifying the document key. You can choose the syntax variant that is the most convenient for you.

The following queries are equivalent:

FOR u IN users
  UPDATE u WITH { name: CONCAT(u.firstName, " ", u.lastName) } IN users
FOR u IN users
  UPDATE u._key WITH { name: CONCAT(u.firstName, " ", u.lastName) } IN users
FOR u IN users
  UPDATE { _key: u._key } WITH { name: CONCAT(u.firstName, " ", u.lastName) } IN users
FOR u IN users
  UPDATE { _key: u._key, name: CONCAT(u.firstName, " ", u.lastName) } IN users

Dynamic key expressions

An UPDATE operation may update arbitrary documents, using either of the two syntaxes:

FOR i IN 1..1000
  UPDATE { _key: CONCAT("test", i), name: "Paula" } IN users
FOR i IN 1..1000
  UPDATE CONCAT("test", i) WITH { name: "Paula" } IN users

Target a different collection

The documents an UPDATE operation modifies can be in a different collection than the ones produced by a preceding FOR operation:

FOR u IN users
  FILTER u.active == false
  UPDATE u WITH { status: "inactive" } IN backup

Note how documents are read from the users collection but updated in another collection called backup. Both collections need to use matching document keys for this to work.

Although the u variable holds a whole document, it is only used to define the target document. The _key attribute of the object is extracted and the target document is solely defined by the document key string value and the specified collection of the UPDATE operation (backup). There is no link to the original collection (users).

Using the current value of a document attribute

The pseudo-variable OLD is not supported inside of WITH clauses (it is available after UPDATE). To access the current attribute value, you can usually refer to a document via the variable of the FOR loop, which is used to iterate over a collection:

FOR doc IN users
  UPDATE doc WITH {
    fullName: CONCAT(doc.firstName, " ", doc.lastName)
  } IN users

If there is no loop, because a single document is updated only, then there might not be a variable like above (doc), which would let you refer to the document which is being updated:

UPDATE "john" WITH { ... } IN users

To access the current value in this situation, you need to retrieve the document first and store it in a variable:

LET doc = FIRST(FOR u IN users FILTER u._key == "john" RETURN u)
UPDATE doc WITH {
  fullName: CONCAT(doc.firstName, " ", doc.lastName)
} IN users

You can modify an existing attribute based on its current value this way, to increment a counter for instance:

UPDATE doc WITH {
  karma: doc.karma + 1
} IN users

If the attribute karma doesn’t exist yet, doc.karma evaluates to null. The expression null + 1 results in the new attribute karma being set to 1. If the attribute does exist, then it is increased by 1.

Arrays can be mutated, too:

UPDATE doc WITH {
  hobbies: PUSH(doc.hobbies, "swimming")
} IN users

If the attribute hobbies doesn’t exist yet, it is conveniently initialized as [ "swimming" ] and otherwise extended.

Query options

You can optionally set query options for the UPDATE operation:

UPDATE ... IN users OPTIONS { ... }

ignoreErrors

You can use ignoreErrors to suppress query errors that may occur when trying to update non-existing documents or when violating unique key constraints:

FOR i IN 1..1000
  UPDATE CONCAT("test", i)
  WITH { foobar: true } IN users
  OPTIONS { ignoreErrors: true }

You cannot modify the _id, _key, and _rev system attributes, but attempts to change them are ignored and not considered errors.

keepNull

When updating an attribute to the null value, ArangoDB does not remove the attribute from the document but stores this null value. To remove attributes in an update operation, set them to null and set the keepNull option to false. This removes the attributes you specify but not any previously stored attributes with the null value:

FOR u IN users
  UPDATE u WITH { foobar: true, notNeeded: null } IN users
  OPTIONS { keepNull: false }

The above query removes the notNeeded attribute from the documents and updates the foobar attribute normally.

Only top-level attributes and sub-attributes can be removed this way (e.g. { attr: { sub: null } }) but not attributes of objects that are nested inside of arrays (e.g. { attr: [ { nested: null } ] }).

mergeObjects

The option mergeObjects controls whether object contents are merged if an object attribute is present in both the UPDATE query and in the to-be-updated document.

The following query sets the updated document’s name attribute to the exact same value that is specified in the query. This is due to the mergeObjects option being set to false:

FOR u IN users
  UPDATE u WITH {
    name: { first: "foo", middle: "b.", last: "baz" }
  } IN users
  OPTIONS { mergeObjects: false }

Contrary, the following query merges the contents of the name attribute in the original document with the value specified in the query:

FOR u IN users
  UPDATE u WITH {
    name: { first: "foo", middle: "b.", last: "baz" }
  } IN users
  OPTIONS { mergeObjects: true }

Attributes in name that are present in the to-be-updated document but not in the query are preserved. Attributes that are present in both are overwritten with the values specified in the query.

Note: the default value for mergeObjects is true, so there is no need to specify it explicitly.

waitForSync

To make sure data are durable when an update query returns, there is the waitForSync query option:

FOR u IN users
  UPDATE u WITH { foobar: true } IN users
  OPTIONS { waitForSync: true }

ignoreRevs

In order to not accidentally overwrite documents that have been modified since you last fetched them, you can use the option ignoreRevs to either let ArangoDB compare the _rev value and only succeed if they still match, or let ArangoDB ignore them (default):

FOR i IN 1..1000
  UPDATE { _key: CONCAT("test", i), _rev: "1287623" }
  WITH { foobar: true } IN users
  OPTIONS { ignoreRevs: false }

exclusive

The RocksDB engine does not require collection-level locks. Different write operations on the same collection do not block each other, as long as there are no write-write conflicts on the same documents. From an application development perspective it can be desired to have exclusive write access on collections, to simplify the development. Note that writes do not block reads in RocksDB. Exclusive access can also speed up modification queries, because we avoid conflict checks.

Use the exclusive option to achieve this effect on a per query basis:

FOR doc IN collection
  UPDATE doc
  WITH { updated: true } IN collection
  OPTIONS { exclusive: true }

refillIndexCaches

Whether to update existing entries in the in-memory edge cache if edge documents are updated.

UPDATE { _key: "123", _from: "vert/C", _to: "vert/D" } IN edgeColl
  OPTIONS { refillIndexCaches: true }

Returning the modified documents

You can optionally return the documents modified by the query. In this case, the UPDATE operation needs to be followed by a RETURN operation. Intermediate LET operations are allowed, too. These operations can refer to the pseudo-variables OLD and NEW. The OLD pseudo-variable refers to the document revisions before the update, and NEW refers to the document revisions after the update.

Both OLD and NEW contain all document attributes, even those not specified in the update expression.

UPDATE document IN collection options RETURN OLD
UPDATE document IN collection options RETURN NEW
UPDATE keyExpression WITH document IN collection options RETURN OLD
UPDATE keyExpression WITH document IN collection options RETURN NEW

Following is an example using a variable named previous to capture the original documents before modification. For each modified document, the document key is returned.

FOR u IN users
  UPDATE u WITH { value: "test" } IN users 
  LET previous = OLD
  RETURN previous._key

The following query uses the NEW pseudo-value to return the updated documents, without some of the system attributes:

FOR u IN users
  UPDATE u WITH { value: "test" } IN users
  LET updated = NEW
  RETURN UNSET(updated, "_key", "_id", "_rev")

It is also possible to return both OLD and NEW:

FOR u IN users
  UPDATE u WITH { value: "test" } IN users
  RETURN { before: OLD, after: NEW }

Transactionality

On a single server, updates are executed transactionally in an all-or-nothing fashion.

A query may execute intermediate transaction commits in case the running transaction (AQL query) hits the specified size thresholds. In this case, the query’s operations carried out so far are committed and not rolled back in case of a later abort/rollback. This behavior can be controlled by adjusting the intermediate commit settings for the RocksDB engine. See Known limitations for AQL queries.

For sharded collections, the entire query and/or update operation may not be transactional, especially if it involves different shards and/or DB-Servers.