ArangoDB v3.9 reached End of Life (EOL) and is no longer supported.

This documentation is outdated. Please see the most recent version at docs.arangodb.com

Features and Improvements in ArangoDB 3.6

The following list shows in detail which features have been added or improved in ArangoDB 3.6. ArangoDB 3.6 also contains several bug fixes that are not listed here.

AQL

Early pruning of non-matching documents

Previously, AQL queries with filter conditions that could not be satisfied by any index required all documents to be copied from the storage engine into the AQL scope in order to be fed into the filter.

An example query execution plan for such query from ArangoDB 3.5 looks like this:

Query String (75 chars, cacheable: true):
 FOR doc IN test FILTER doc.value1 > 9 && doc.value2 == 'test854' RETURN doc

Execution plan:
 Id   NodeType                    Est.   Comment
  1   SingletonNode                  1   * ROOT
  2   EnumerateCollectionNode   100000     - FOR doc IN test   /* full collection scan */
  3   CalculationNode           100000       - LET #1 = ((doc.`value1` > 9) && (doc.`value2` == "test854"))
  4   FilterNode                100000       - FILTER #1
  5   ReturnNode                100000       - RETURN doc

ArangoDB 3.6 adds an optimizer rule move-filters-into-enumerate which allows applying the filter condition directly while scanning the documents, so copying of any documents that don’t match the filter condition can be avoided.

The query execution plan for the above query from 3.6 with that optimizer rule applied looks as follows:

Query String (75 chars, cacheable: true):
 FOR doc IN test FILTER doc.value1 > 9 && doc.value2 == 'test854' RETURN doc

Execution plan:
 Id   NodeType                    Est.   Comment
  1   SingletonNode                  1   * ROOT
  2   EnumerateCollectionNode   100000     - FOR doc IN test   /* full collection scan */   FILTER ((doc.`value1` > 9) && (doc.`value2` == "test854"))   /* early pruning */
  5   ReturnNode                100000       - RETURN doc

Note that in this execution plan the scanning and filtering are combined in one node, so the copying of all non-matching documents from the storage engine into the AQL scope is completely avoided.

This optimization will be beneficial if the filter condition is very selective and will filter out many documents, and if documents are large. In this case a lot of copying will be avoided.

The optimizer rule also works if an index is used, but there are also filter conditions that cannot be satisfied by the index alone. Here is a 3.5 query execution plan for a query using a filter on an indexed value plus a filter on a non-indexed value:

Query String (101 chars, cacheable: true):
 FOR doc IN test FILTER doc.value1 > 10000 && doc.value1 < 30000 && doc.value2 == 'test854' RETURN
 doc

Execution plan:
 Id   NodeType           Est.   Comment
  1   SingletonNode         1   * ROOT
  6   IndexNode         26666     - FOR doc IN test   /* hash index scan */
  7   CalculationNode   26666       - LET #1 = (doc.`value2` == "test854")
  4   FilterNode        26666       - FILTER #1
  5   ReturnNode        26666       - RETURN doc

Indexes used:
 By   Name                      Type   Collection   Unique   Sparse   Selectivity   Fields         Ranges
  6   idx_1649353982658740224   hash   test         false    false       100.00 %   [ `value1` ]   ((doc.`value1` > 10000) && (doc.`value1` < 30000))

In 3.6, the same query will be executed using a combined index scan & filtering approach, again avoiding any copies of non-matching documents:

Query String (101 chars, cacheable: true):
 FOR doc IN test FILTER doc.value1 > 10000 && doc.value1 < 30000 && doc.value2 == 'test854' RETURN
 doc

Execution plan:
 Id   NodeType         Est.   Comment
  1   SingletonNode       1   * ROOT
  6   IndexNode       26666     - FOR doc IN test   /* hash index scan */   FILTER (doc.`value2` == "test854")   /* early pruning */
  5   ReturnNode      26666       - RETURN doc

Indexes used:
 By   Name                      Type   Collection   Unique   Sparse   Selectivity   Fields         Ranges
  6   idx_1649353982658740224   hash   test         false    false       100.00 %   [ `value1` ]   ((doc.`value1` > 10000) && (doc.`value1` < 30000))

Subquery Splicing Optimization

In earlier versions of ArangoDB, on every execution of a subquery the following happened for each input row:

  • The subquery tree issues one initializeCursor cascade through all nodes
  • The subquery node pulls rows until the subquery node is empty for this input

On subqueries with many results per input row (10000 or more) the above steps did not contribute significantly to query execution time. On subqueries with few results per input, there was a serious performance impact.

Subquery splicing inlines the execution of subqueries using an optimizer rule called splice-subqueries. Only suitable queries can be spliced. A subquery becomes unsuitable if it contains a LIMIT node or a COLLECT WITH COUNT INTO … construct (but not due to a COLLECT var = <expr> WITH COUNT INTO …). A subquery also becomes unsuitable if it is contained in a (sub)query containing unsuitable parts after the subquery.

Consider the following query to illustrate the difference.

FOR x IN c1
  LET firstJoin = (
    FOR y IN c2
      FILTER y._id == x.c2_id
      LIMIT 1
      RETURN y
  )
  LET secondJoin = (
    FOR z IN c3
      FILTER z.value == x.value
      RETURN z
  )
  RETURN { x, firstJoin, secondJoin }

The execution plan without subquery splicing:

Execution plan:
 Id   NodeType                  Est.   Comment
  1   SingletonNode                1   * ROOT
  2   EnumerateCollectionNode      0     - FOR x IN c1   /* full collection scan */
  9   SubqueryNode                 0       - LET firstJoin = ...   /* subquery */
  3   SingletonNode                1         * ROOT
 18   IndexNode                    0           - FOR y IN c2   /* primary index scan */
  7   LimitNode                    0             - LIMIT 0, 1
  8   ReturnNode                   0             - RETURN y
 15   SubqueryNode                 0       - LET secondJoin = ...   /* subquery */
 10   SingletonNode                1         * ROOT
 11   EnumerateCollectionNode      0           - FOR z IN c3   /* full collection scan */
 12   CalculationNode              0             - LET #11 = (z.`value` == x.`value`)   /* simple expression */   /* collections used: z : c3, x : c1 */
 13   FilterNode                   0             - FILTER #11
 14   ReturnNode                   0             - RETURN z
 16   CalculationNode              0       - LET #13 = { "x" : x, "firstJoin" : firstJoin, "secondJoin" : secondJoin }   /* simple expression */   /* collections used: x : c1 */
 17   ReturnNode                   0       - RETURN #13

Optimization rules applied:
 Id   RuleName
  1   use-indexes
  2   remove-filter-covered-by-index
  3   remove-unnecessary-calculations-2

Note in particular the SubqueryNodes, followed by a SingletonNode in both cases.

When using the optimizer rule splice-subqueries the plan is as follows:

Execution plan:
 Id   NodeType                  Est.   Comment
  1   SingletonNode                1   * ROOT
  2   EnumerateCollectionNode      0     - FOR x IN c1   /* full collection scan */
  9   SubqueryNode                 0       - LET firstJoin = ...   /* subquery */
  3   SingletonNode                1         * ROOT
 18   IndexNode                    0           - FOR y IN c2   /* primary index scan */
  7   LimitNode                    0             - LIMIT 0, 1
  8   ReturnNode                   0             - RETURN y
 19   SubqueryStartNode            0       - LET secondJoin = ( /* subquery begin */
 11   EnumerateCollectionNode      0         - FOR z IN c3   /* full collection scan */
 12   CalculationNode              0           - LET #11 = (z.`value` == x.`value`)   /* simple expression */   /* collections used: z : c3, x : c1 */
 13   FilterNode                   0           - FILTER #11
 20   SubqueryEndNode              0       - ) /* subquery end */
 16   CalculationNode              0       - LET #13 = { "x" : x, "firstJoin" : firstJoin, "secondJoin" : secondJoin }   /* simple expression */   /* collections used: x : c1 */
 17   ReturnNode                   0       - RETURN #13

Optimization rules applied:
 Id   RuleName
  1   use-indexes
  2   remove-filter-covered-by-index
  3   remove-unnecessary-calculations-2
  4   splice-subqueries

The first subquery is unsuitable for the optimization because it contains a LIMIT statement and is therefore not spliced. The second subquery is suitable and hence is spliced – which one can tell from the different node type SubqueryStartNode (beginning of spliced subquery). Note how it is not followed by a SingletonNode. The end of the spliced subquery is marked by a SubqueryEndNode.

Late document materialization (RocksDB)

With the late document materialization optimization ArangoDB tries to read only documents that are absolutely necessary to compute the query result, reducing load to the storage engine. This is only supported for the RocksDB storage engine.

In 3.6 the optimization can only be applied to queries retrieving data from a collection or an ArangoSearch View and that contain a SORT+LIMIT combination.

For the collection case the optimization is possible if and only if:

  • there is an index of type primary, hash, skiplist, persistent or edge picked by the optimizer
  • all attribute accesses can be covered by indexed attributes
// Given we have a persistent index on attributes [ "foo", "bar", "baz" ]
FOR d IN myCollection
  FILTER d.foo == "someValue" // hash index will be picked to optimize filtering
  SORT d.baz DESC             // field "baz" will be read from index
  LIMIT 100                   // only 100 documents will be materialized
  RETURN d

For the ArangoSearch View case the optimization is possible if and only if:

  • all attribute accesses can be covered by attributes stored in the View index (e.g. using primarySort)
  • the primary sort order optimization is not applied, because it voids the need for late document materialization
// Given primarySort is {"field": "foo", "asc": false}, i.e.
// field "foo" covered by index but sort optimization not applied
// (sort order of primarySort and SORT operation mismatch)
FOR d IN myView
  SORT d.foo
  LIMIT 100  // only 100 documents will be materialized
  RETURN d
// Given primarySort contains field "foo"
FOR d IN myView
  SEARCH d.foo == "someValue"
  SORT BM25(d) DESC  // BM25(d) will be evaluated by the View node above
  LIMIT 100          // only 100 documents will be materialized
  RETURN d
// Given primarySort contains fields "foo" and "bar", and "bar" is not the
// first field or at least not sorted by in descending order, i.e. the sort
// optimization can not be applied but the late document materialization instead
FOR d IN myView
  SEARCH d.foo == "someValue"
  SORT d.bar DESC    // field "bar" will be read from the View
  LIMIT 100          // only 100 documents will be materialized
  RETURN d

The respective optimizer rules are called late-document-materialization (collection source) and late-document-materialization-arangosearch (ArangoSearch View source). If applied, you will find MaterializeNodes in execution plans.

Parallelization of cluster AQL queries

ArangoDB 3.6 can parallelize work in many cluster AQL queries when there are multiple DB-Servers involved. The parallelization is done in the GatherNode, which then can send parallel cluster-internal requests to the DB-Servers attached. The DB-Servers can then work fully parallel for the different shards involved.

When parallelization is used, one or multiple GatherNodes in a query’s execution plan will be tagged with parallel as follows:

 Id   NodeType                  Site     Est.   Comment
  1   SingletonNode             DBS         1   * ROOT
  2   EnumerateCollectionNode   DBS   1000000     - FOR doc IN test   /* full collection scan, 5 shard(s) */
  6   RemoteNode                COOR  1000000       - REMOTE
  7   GatherNode                COOR  1000000       - GATHER   /* parallel */
  3   ReturnNode                COOR  1000000       - RETURN doc

Parallelization is currently restricted to certain types and parts of queries. GatherNodes will go into parallel mode only if the DB-Server query part above it (in terms of query execution plan layout) is a terminal part of the query. To trigger the optimization, there must not be other nodes of type ScatterNode, GatherNode or DistributeNode present in the query.

Please note that the parallelization of AQL execution may lead to a different resource usage pattern for eligible AQL queries in the cluster. In isolation, queries are expected to complete faster with parallelization than when executing their work serially on all involved DB-Servers. However, working on multiple DB-Servers in parallel may also mean that more work than before is happening at the very same time. If this is not desired because of resource scarcity, there are options to control the parallelization:

The startup option --query.parallelize-gather-writes can be used to control whether eligible write operation parts will be parallelized. This option defaults to true, meaning that eligible write operations are also parallelized by default. This can be turned off so that potential I/O overuse can be avoided for write operations when used together with a high replication factor.

Additionally, the startup option --query.optimizer-rules can be used to globally toggle the usage of certain optimizer rules for all queries. By default, all optimizations are turned on. However, specific optimizations can be turned off using the option.

For example, to turn off the parallelization entirely (including parallel gather writes), one can use the following configuration:

--query.optimizer-rules "-parallelize-gather"

This toggle works for any other non-mandatory optimizer rules as well. To specify multiple optimizer rules, the option can be used multiple times, e.g.

--query.optimizer-rules "-parallelize-gather" --query.optimizer-rules "-splice-subqueries"

You can overrule which optimizer rules to use or not use on a per-query basis still. --query.optimizer-rules merely defines a default. However, --query.parallelize-gather-writes false turns off parallel gather writes completely and it cannot be re-enabled for individual queries.

Optimizations for simple UPDATE and REPLACE queries

Cluster query execution plans for simple UPDATE and REPLACE queries that modify multiple documents and do not use LIMIT are now more efficient as several steps were removed. The existing optimizer rule undistribute-remove-after-enum-coll has been extended to cover these cases too, in case the collection is sharded by _key and the UPDATE/REPLACE operation is using the full document or the _key attribute to find it.

For example, a query such as:

FOR doc IN test UPDATE doc WITH { updated: true } IN test

… is executed as follows in 3.5:

 Id   NodeType                  Site     Est.   Comment
  1   SingletonNode             DBS         1   * ROOT
  3   CalculationNode           DBS         1     - LET #3 = { "updated" : true }
  2   EnumerateCollectionNode   DBS   1000000     - FOR doc IN test   /* full collection scan, 5 shard(s) */
 11   RemoteNode                COOR  1000000       - REMOTE
 12   GatherNode                COOR  1000000       - GATHER  
  5   DistributeNode            COOR  1000000       - DISTRIBUTE  /* create keys: false, variable: doc */
  6   RemoteNode                DBS   1000000       - REMOTE
  4   UpdateNode                DBS         0       - UPDATE doc WITH #3 IN test
  7   RemoteNode                COOR        0       - REMOTE
  8   GatherNode                COOR        0       - GATHER

In 3.6 the execution plan is streamlined to just:

 Id   NodeType          Site     Est.   Comment
  1   SingletonNode     DBS         1   * ROOT
  3   CalculationNode   DBS         1     - LET #3 = { "updated" : true }
 13   IndexNode         DBS   1000000     - FOR doc IN test   /* primary index scan, index only, projections: `_key`, 5 shard(s) */
  4   UpdateNode        DBS         0       - UPDATE doc WITH #3 IN test
  7   RemoteNode        COOR        0       - REMOTE
  8   GatherNode        COOR        0       - GATHER   /* parallel */

As can be seen above, the benefit of applying the optimization is that the extra communication between the Coordinator and DB-Server is removed. This will mean less cluster-internal traffic and thus can result in faster execution. As an extra benefit, the optimization will also make the affected queries eligible for parallel execution. It is only applied in cluster deployments.

The optimization will also work when a filter is involved:

Query String (79 chars, cacheable: false):
 FOR doc IN test FILTER doc.value == 4 UPDATE doc WITH { updated: true } IN test

Execution plan:
 Id   NodeType                  Site     Est.   Comment
  1   SingletonNode             DBS         1   * ROOT
  5   CalculationNode           DBS         1     - LET #5 = { "updated" : true }
  2   EnumerateCollectionNode   DBS   1000000     - FOR doc IN test   /* full collection scan, projections: `_key`, `value`, 5 shard(s) */
  3   CalculationNode           DBS   1000000       - LET #3 = (doc.`value` == 4)
  4   FilterNode                DBS   1000000       - FILTER #3
  6   UpdateNode                DBS         0       - UPDATE doc WITH #5 IN test
  9   RemoteNode                COOR        0       - REMOTE
 10   GatherNode                COOR        0       - GATHER

AQL Date functionality

AQL now enforces a valid date range for working with date/time in AQL. The valid date ranges for any AQL date/time function are:

  • for string date/time values: "0000-01-01T00:00:00.000Z" (including) up to "9999-12-31T23:59:59.999Z" (including)
  • for numeric date/time values: -62167219200000 (including) up to 253402300799999 (including). These values are the numeric equivalents of "0000-01-01T00:00:00.000Z" and "9999-12-31T23:59:59.999Z".

Any date/time values outside the given range that are passed into an AQL date function will make the function return null and trigger a warning in the query, which can optionally be escalated to an error and stop the query.

Any date/time operations that produce date/time outside the valid ranges stated above will make the function return null and trigger a warning too. An example for this is:

DATE_SUBTRACT("2018-08-22T10:49:00+02:00", 100000, "years")

The performance of AQL date operations that work on date strings has been improved compared to previous versions.

Finally, ArangoDB 3.6 provides a new AQL function DATE_ROUND() to bin a date/time into a set of equal-distance buckets.

Miscellaneous AQL changes

In addition, ArangoDB 3.6 provides the following new AQL functionality:

  • a function GEO_AREA() for area calculations (also added to v3.5.1)

  • a query option maxRuntime to restrict the execution to a given time in seconds (also added to v3.5.4). Also see HTTP API.

  • a startup option --query.optimizer-rules to turn certain AQL query optimizer rules off (or on) by default. This can be used to turn off certain optimizations that would otherwise lead to undesired changes in server resource usage patterns.

ArangoSearch

Analyzers

  • Added UTF-8 support and ability to mark beginning/end of the sequence to the ngram Analyzer type.

    The following optional properties can be provided for an ngram Analyzer definition:

    • startMarker : <string>, default: ““
      this value will be prepended to n-grams at the beginning of input sequence

    • endMarker : <string>, default: ““
      this value will be appended to n-grams at the beginning of input sequence

    • streamType : "binary"|"utf8", default: “binary”
      type of the input stream (support for UTF-8 is new)

  • Added edge n-gram support to the text Analyzer type. The input gets tokenized as usual, but then n-grams are generated from each token. UTF-8 encoding is assumed (whereas the ngram Analyzer has a configurable stream type and defaults to binary).

    The following optional properties can be provided for a text Analyzer definition:

    • edgeNgram (object, optional):
      • min (number, optional): minimal n-gram length
      • max (number, optional): maximal n-gram length
      • preserveOriginal (boolean, optional): include the original token if its length is less than min or greater than max

Dynamic search expressions with arrays

ArangoSearch now accepts SEARCH expressions with array comparison operators in the form of:

<array> [ ALL|ANY|NONE ] [ <=|<|==|!=|>|>=|IN ] doc.<attribute>

i.e. the left-hand side operand is always an array, which can be dynamic.

LET tokens = TOKENS("some input", "text_en")                 // ["some", "input"]
FOR doc IN myView SEARCH tokens  ALL IN doc.title RETURN doc // dynamic conjunction
FOR doc IN myView SEARCH tokens  ANY IN doc.title RETURN doc // dynamic disjunction
FOR doc IN myView SEARCH tokens NONE IN doc.title RETURN doc // dynamic negation
FOR doc IN myView SEARCH tokens  ALL >  doc.title RETURN doc // dynamic conjunction with comparison
FOR doc IN myView SEARCH tokens  ANY <= doc.title RETURN doc // dynamic disjunction with comparison

In addition, both the TOKENS() and the PHRASE() functions were extended with array support for convenience.

TOKENS() accepts recursive arrays of strings as the first argument:

TOKENS("quick brown fox", "text_en")        // [ "quick", "brown", "fox" ]
TOKENS(["quick brown", "fox"], "text_en")   // [ ["quick", "brown"], ["fox"] ]
TOKENS(["quick brown", ["fox"]], "text_en") // [ ["quick", "brown"], [["fox"]] ]

In most cases you will want to flatten the resulting array for further usage, because nested arrays are not accepted in SEARCH statements such as <array> ALL IN doc.<attribute>:

LET tokens = TOKENS(["quick brown", ["fox"]], "text_en") // [ ["quick", "brown"], [["fox"]] ]
LET tokens_flat = FLATTEN(tokens, 2)                     // [ "quick", "brown", "fox" ]
FOR doc IN myView SEARCH ANALYZER(tokens_flat ALL IN doc.title, "text_en") RETURN doc

PHRASE() accepts an array as the second argument:

FOR doc IN myView SEARCH PHRASE(doc.title, ["quick brown fox"], "text_en") RETURN doc
FOR doc IN myView SEARCH PHRASE(doc.title, ["quick", "brown", "fox"], "text_en") RETURN doc

LET tokens = TOKENS("quick brown fox", "text_en") // ["quick", "brown", "fox"]
FOR doc IN myView SEARCH PHRASE(doc.title, tokens, "text_en") RETURN doc

It is equivalent to the more cumbersome and static form:

FOR doc IN myView SEARCH PHRASE(doc.title, "quick", 0, "brown", 0, "fox", "text_en") RETURN doc

You can optionally specify the number of skipTokens in the array form before every string element:

FOR doc IN myView SEARCH PHRASE(doc.title, ["quick", 1, "fox", "jumps"], "text_en") RETURN doc

It is the same as the following:

FOR doc IN myView SEARCH PHRASE(doc.title, "quick", 1, "fox", 0, "jumps", "text_en") RETURN doc

SmartJoins and Views

ArangoSearch Views are now eligible for SmartJoins in AQL, provided that their underlying collections are eligible too.

All collections forming the View must be sharded equally. The other join operand can be a collection or another View.

OneShard

This option is only available in the Enterprise Edition, including the ArangoGraph Insights Platform.

Not all use cases require horizontal scalability. In such cases, a OneShard deployment offers a practicable solution that enables significant performance improvements by massively reducing cluster-internal communication.

A database created with OneShard enabled is limited to a single DB-Server node but still replicated synchronously to ensure resilience. This configuration allows running transactions with ACID guarantees on shard leaders.

This setup is highly recommended for most graph use cases and join-heavy queries.

Unlike a (flexibly) sharded cluster, where the Coordinator distributes access to shards across different DB-Server nodes, collects and processes partial results, the Coordinator in a OneShard setup moves the query execution directly to the respective DB-Server for local query execution. The Coordinator receives only the final result. This can drastically reduce resource consumption and communication effort for the Coordinator.

An entire cluster, selected databases or selected collections can be made eligible for the OneShard optimization. See OneShard cluster architecture for details and usage examples.

HTTP API

The following APIs have been expanded / changed:

  • Database creation API,
    HTTP route POST /_api/database

    The database creation API now handles the replicationFactor, writeConcern and sharding attributes. All these attributes are optional, and only meaningful in a cluster.

    The values provided for the attributes replicationFactor and writeConcern will be used as default values when creating collections in that database, allowing to omit these attributes when creating collections. However, the values set here are just defaults for new collections in the database. The values can still be adjusted per collection when creating new collections in that database via the web UI, the arangosh or drivers.

    In an Enterprise Edition cluster, the sharding attribute can be given a value of "single", which will make all new collections in that database use the same shard distribution and use one shard by default (OneShard configuration). This can still be overridden by setting the values of numberOfShards and distributeShardsLike when creating new collections in that database via the web UI, arangosh or drivers (unless the startup option --cluster.force-one-shard is enabled).

  • Database properties API,
    HTTP route GET /_api/database/current

    The database properties endpoint returns the new additional attributes replicationFactor, writeConcern and sharding in a cluster. A description of these attributes can be found above.

  • Collection / Graph APIs,
    HTTP routes POST /_api/collection, GET /_api/collection/{collection-name}/properties and various /_api/gharial/* endpoints

    minReplicationFactor has been renamed to writeConcern for consistency. The old attribute name is still accepted and returned for compatibility.

  • Hot Backup API,
    HTTP route POST /_admin/backup/create

    New attribute force, see Hot Backup below.

  • New Metrics API,
    HTTP route GET /_admin/metrics

    Returns the instance’s current metrics in Prometheus format. The returned document collects all instance metrics, which are measured at any given time and exposes them for collection by Prometheus.

    The new endpoint can be used instead of the additional tool arangodb-exporter.

Web interface

The web interface now shows the shards of all collections (including system collections) in the shard distribution view. Displaying system collections here is necessary to access the prototype collections of a collection sharded via distributeShardsLike in case the prototype is a system collection, and the prototype collection shall be moved to another server using the web interface.

The web interface now also allows setting a default replication factor when a creating a new database. This default replication factor will be used for all collections created in the new database, unless explicitly overridden.

Startup options

Metrics API option

The new option --server.export-metrics-api allows you to disable the metrics API by setting it to false, which is otherwise turned on by default.

OneShard cluster option

The option --cluster.force-one-shard enables the new OneShard feature for the entire cluster deployment. It forces the cluster into creating all future collections with only a single shard and using the same DB-Server as these collections’ shards leader. All collections created this way will be eligible for specific AQL query optimizations that can improve query performance and provide advanced transactional guarantees.

Cluster upgrade option

The new option --cluster.upgrade toggles the cluster upgrade mode for Coordinators. It supports the following values:

  • auto: perform a cluster upgrade and shut down afterwards if the startup option --database.auto-upgrade is set to true. Otherwise, don’t perform an upgrade.

  • disable: never perform a cluster upgrade, regardless of the value of --database.auto-upgrade.

  • force: always perform a cluster upgrade and shut down, regardless of the value of --database.auto-upgrade.

  • online: always perform a cluster upgrade but don’t shut down afterwards

The default value is auto. The option only affects Coordinators. It does not have any affect on single servers, Agents or DB-Servers.

Other cluster options

The following options have been added:

  • --cluster.max-replication-factor: maximum replication factor for new collections. A value of 0 means that there is no restriction. The default value is 10.

  • --cluster.min-replication-factor: minimum replication factor for new collections. The default value is 1. This option can be used to prevent the creation of collections that do not have any or enough replicas.

  • --cluster.write-concern: default write concern value used for new collections. This option controls the number of replicas that must successfully acknowledge writes to a collection. If any write operation gets less acknowledgements than configured here, the collection will go into read-only mode until the configured number of replicas are available again. The default value is 1, meaning that writes to just the leader are sufficient. To ensure that there is at least one extra copy (i.e. one follower), set this option to 2.

  • --cluster.max-number-of-shards: maximum number of shards allowed for new collections. A value of 0 means that there is no restriction. The default value is 1000.

Note that the above options only have an effect when set for Coordinators, and only for collections that are created after the options have been set. They do not affect already existing collections.

Furthermore, the following network related options have been added:

  • --network.idle-connection-ttl: default time-to-live for idle cluster-internal connections (in milliseconds). The default value is 60000.

  • --network.io-threads: number of I/O threads for cluster-internal network requests. The default value is 2.

  • --network.max-open-connections: maximum number of open network connections for cluster-internal requests. The default value is 1024.

  • --network.verify-hosts: if set to true, this will verify peer certificates for cluster-internal requests when TLS is used. The default value is false.

RocksDB exclusive writes option

The new option --rocksdb.exclusive-writes allows to make all writes to the RocksDB storage exclusive and therefore avoids write-write conflicts. This option was introduced to open a way to upgrade from MMFiles to RocksDB storage engine without modifying client application code. Otherwise it should best be avoided as the use of exclusive locks on collections will introduce a noticeable throughput penalty.

Note that the MMFiles engine is deprecated from v3.6.0 on and will be removed in a future release. So will be this option, which is a stopgap measure only.

AQL options

The new startup option --query.optimizer-rules can be used to to selectively enable or disable AQL query optimizer rules by default. The option can be specified multiple times, and takes the same input as the query option of the same name.

For example, to turn off the rule use-indexes-for-sort, use

--query.optimizer-rules "-use-indexes-for-sort"

The purpose of this startup option is to be able to enable potential future experimental optimizer rules, which may be shipped in a disabled-by-default state.

Hot Backup

  • Force Backup

    When creating backups there is an additional option --force for arangobackup and in the HTTP API. This option aborts ongoing write transactions to obtain the global lock for creating the backup. Most likely this is not what you want to do because it will abort valid ongoing write operations, but it makes sure that backups can be acquired more quickly. The force flag currently only aborts Stream Transactions but no JavaScript Transactions.

  • View Data

    HotBackup now includes View data. Previously the Views had to be rebuilt after a restore. Now the Views are available immediately.

TLS v1.3

Added support for TLS 1.3 for the arangod server and the client tools (also added to v3.5.1).

The arangod server can be started with option --ssl.protocol 6 to make it require TLS 1.3 for incoming client connections. The server can be started with option --ssl.protocol 5 to make it require TLS 1.2, as in previous versions of arangod.

The default TLS protocol for the arangod server is now generic TLS (--ssl.protocol 9), which will allow the negotiation of the TLS version between the client and the server.

All client tools also support TLS 1.3, by using the --ssl.protocol 6 option when invoking them. The client tools will use TLS 1.2 by default, in order to be compatible with older versions of ArangoDB that may be contacted by these tools.

To configure the TLS version for arangod instances started by the ArangoDB starter, one can use the --all.ssl.protocol=VALUE startup option for the ArangoDB starter, where VALUE is one of the following:

  • 4 = TLSv1
  • 5 = TLSv1.2
  • 6 = TLSv1.3
  • 9 = generic TLS

Note: TLS v1.3 support has been added in ArangoDB v3.5.1 already, but the default TLS version in ArangoDB 3.5 was still TLS v1.2. ArangoDB v3.6 uses “generic TLS” as its default TLS version, which will allows clients to negotiate the TLS version with the server, dynamically choosing the highest mutually supported version of TLS.

Miscellaneous

  • Remove operations for documents in the cluster will now use an optimization, if all sharding keys are specified. Should the sharding keys not match the values in the actual document, a not found error will be returned.

  • Collection names in ArangoDB can now be up to 256 characters long, instead of 64 characters in previous versions.

  • Disallow using _id or _rev as shard keys in clustered collections.

    Using these attributes for sharding was not supported before, but didn’t trigger any errors. Instead, collections were created and silently using _key as the shard key, without making the caller aware of that an unsupported shard key was used.

  • Make the scheduler enforce the configured queue lengths. The values of the options --server.scheduler-queue-size, --server.prio1-size and --server.maximal-queue-size will now be honored and not exceeded.

    The default queue sizes in the scheduler for requests buffering have also been changed as follows:

    request type        before      now
    -----------------------------------
    high priority          128     4096
    medium priority    1048576     4096
    low priority          4096     4096
    

    The queue sizes can still be adjusted at server start using the above- mentioned startup options.

Internal

Release packages for Linux are now built using inter-procedural optimizations (IPO).

We have moved from C++14 to C++17, which allows us to use some of the simplifications, features and guarantees that this standard has in stock. To compile ArangoDB 3.6 from source, a compiler that supports C++17 is now required.

The bundled JEMalloc memory allocator used in ArangoDB release packages has been upgraded from version 5.2.0 to version 5.2.1.

The bundled version of the Boost library has been upgraded from 1.69.0 to 1.71.0.

The bundled version of xxhash has been upgraded from 0.5.1 to 0.7.2.